Home > $1000 and up
Sort By:
Page of 1
Arcanist Jon

Atomic Blue Stardust Cavalier Rig

Our Price: $599.99
FSU Rig Collab by Dr Gomez and Glass Hopper FSU Themed Rig Collab by Dr. Ben VII Gomez and Glass Hopper

This hand blown FSU themed rig collab by Dr. Ben VII Gomez and Glass Hopper is made in Florida, USA. Featuring a white Dr. Gomez figure with FSU colored war paint attached to the pipe, seven encased opals and a marble on the dome. Glass Hopper did the line work and the attached arrowhead with Seminole colors. A wide base adds stability to the pipe so it is less likely to get knocked over. This is the ultimate game day pipe for Seminole fans when tailgating or watching the National Champion Florida State Seminoles on the football field. Ti signed and dated by the artists.

FEATURES

  • 7 encased opals
  • White Dr. Gomez figurine
  • Glass Hopper's line work and arrowhead
  • Fixed downstem
  • Wide base
  • Ti signed and dated by the artists
  • Hand blown
  • Made in Florida, USA

SPECIFICATIONS

  • Height: 7 inches
  • Width: 3.8 inches
  • Weight: 314 grams
  • Joint Size: 14mm


Our Price: $1,099.99
Space Case Water Pipe by Lion Glass (Scott Ratner) Space Case Water Pipe by Lion Glass

This Lion Glass space case water pipe is made in Denver, Colorado and features 49 sculpted satellites attached to the pipe. Smoke diffusion is achieved via a three hole fixed downstem and the 14mm slide has a three hole bowl. The bottom of the piece is ti signed and dated by the artist.

FEATURES

  • 49 sculpted satellites
  • 3 hole fixed downstem
  • 3 hole slide
  • Ti signed and dated
  • Made in Denver, CO

SPECIFICATIONS

  • Height: 6.5 inches
  • Width: 4 inches
  • Weight: 620.9 grams
  • Joint Size: 14mm female


Our Price: $1,099.99
Faceted Hand Pipe Collab by Mike Raman & Murdoc Glass Faceted Hand Pipe Collab by Mike Raman & Murdoc Glass

This Mike Raman and Murdoc Glass hand pipe collab was made in the USA and features seguso line work on the pipe's midsection and cab attachment, and is hand faceted.

FEATURES

  • Seguso line work
  • Hand faceted
  • Made in the USA

SPECIFICATIONS

  • Length: 4.5 inches
  • Width: 1 inch
  • Weight: 81.8 grams


Our Price: $1,099.99
Bee Tube Vapor Rig Water Pipe by Sea Shakes Bee Tube by Sea Shakes

This Sea Shakes bee tube was made in Florida and features a sculpted bee's head and Grateful Dead millie eyes. A 14mm slide is included and the water pipe easily converts to a rig by replacing the slide with a banger (not included). The bottom of the pipe is ti signed, dated and numbered.

FEATURES

  • Sculpted bee's head
  • Grateful Dead millie eyes
  • 14mm slide included
  • Ti signed, dated & numbered
  • Made in Florida

SPECIFICATIONS

  • Height: 10.5 inches
  • Width: 2.75 inches
  • Weight: 515 grams
  • Joint Size: 14mm female




Our Price: $1,099.99
"The Disc" Exo Diffy Vapor Rig by Hamm's Waterworks "The Disc" Exo Diffy Vapor Rig by Hamm's Waterworks

This Hamm Disc Rig is made in the USA and features a three hole exo diffy perc for smoke/vapor diffusion. The sidecar mouthpiece prevents water from splashing up when taking a hit and the pipe is self leveling to prevent the water from spilling.

FEATURES

  • 3 hole exo diffy perc
  • Sidecar mouthpiece
  • Self leveling
  • Made in the USA

SPECIFICATIONS

  • Height: 6 inches
  • Width: 5 inches
  • Weight: 515 grams
  • Joint Size: 18mm


Our Price: $1,155.00
Wig Wag Mini Tube Vapor Rig Water Pipe by Kennaroo Mini Vapor Tube by Kennaroo

This hand made Kennaroo mini tube is made in Georgia and features wig wag patterns throughout the rig. Smoke diffusion is achieved via a removable two hole downstem. The vapor dome and bottom of the water pipe are ti signed and dated by the artist.

FEATURES

  • Wig wags
  • Slyme mouthpiece
  • Removable 2 hole downstem
  • Ti signed and dated by the artist
  • Made in Georgia

SPECIFICATIONS

  • Height: 6.25 inches
  • Width: 2.8 inches
  • Weight: 256.7 grams
  • Joint Size: 14mm to 14mm


Our Price: $1,199.99
Mini Tube Vapor Rig Water Pipe by Germ Mini Tube Rig by Germ

This hand blown Germ mini tube was made in Philadelphia, PA and features a bent neck to help prevent water from splashing up too high and a two hole fixed downstem for smoke diffusion. The bottom of the water pipe is Ti signed and dated by the artist.

FEATURES

  • 2 hole fixed downstem
  • Bent neck
  • Ti signed and dated
  • Hand blown
  • Made in Philadelphia, PA

SPECIFICATIONS

  • Height: 6.5 inches
  • Width: 2 inches
  • Weight: 159.6 grams
  • Joint Size: 14mm


Our Price: $1,199.99
Mini Tube Vapor Rig Water Pipe Collab by Chad G & Yak Mini Tube Rig Collab by Chad G & Yak

This hand blown Chad G and Yak mini tube collab was made in the TLeaf studio during a live glassblowing demo and features a sandblasted finish and two cabs featuring Yak's intricate dot work attached to the water pipe.

FEATURES

  • Sandblasted
  • 2 Yak cabs
  • Hand blown
  • Made in the TLeaf studio

SPECIFICATIONS

  • Height: 8 inches
  • Width: 2.25 inches
  • Weight: 248.3 grams
  • Joint Size: 10mm


Our Price: $1,199.99
Serum Recycler Vapor Rig Water Pipe by JB Glassart Serum Recycler Rig by JB Glassart

This hand blown JB Glassart recycler rig was made in Tallahassee, Florida and features color changing serum sections, a green stardust section and an implosion marble attachment with an encased opal. Smoke diffusion is achieved via a three hole fixed diffy and the bottom of the water pipe is ti signed, dated and numbered (#39) by the artist.

FEATURES

  • Color changing serum sections
  • Green stardust section
  • Implosion marble with encased opal
  • 3 hole fixed diffy
  • Ti signed, dated and numbered (#39)
  • Hand blown
  • Made in Tallahassee, FL

SPECIFICATIONS

  • Height: 7 inches
  • Width: 2.75 inches
  • Weight: 182.5 grams
  • Joint Size: 10mm female


Our Price: $1,999.99
Sale Price: $1,199.99
Savings: $800.00
Monkey Head Pendant by Coyle Condenser Monkey Head Pendant by Coyle Condenser

  • Ti signed and dated by the artist

Our Price: $1,199.99
Exo Diffy Cube Vapor Rig by Hamm's Waterworks Exo Diffy Vapor Rig by Hamm's Waterworks

This Hamm's Waterworks cube rig is made in Oregon, USA and features a four hole exo diffy perc for smoke/vapor diffusion. A sidecar mouthpiece prevents water from splashing up and an 18mm dome comes with the pipe.

FEATURES

  • 4 hole exo diffy perc
  • Sidecar mouthpiece
  • Made in Oregon, USA

SPECIFICATIONS

  • Height: 5.6 inches
  • Width: 3.2 inches
  • Weight: 499.4 grams
  • Joint Size: 18mm


Our Price: $1,260.00
Concentrate Rig by Brian Jacobson Vapor Rig by Brian Jacobson

This hand blown Brian Jacobson vapor rig is made in the USA. Featuring wig wags throughout and a peace sign in the middle of a fillacello pattern. The joints on the pipe and dome are hand worked and smoke/vapor diffusion is achieved by a 3 hole diffy.

FEATURES

  • Wig wag patterns
  • Fillacello pattern with a center peace sign
  • Worked joints on the pipe and dome
  • 3 hole downstem
  • Hand blown
  • Made in the USA

SPECIFICATIONS

  • Height: 9 inches
  • Width: 3 inches
  • Weight: 300.8 grams
  • Joint Size: 14mm to 14mm


Our Price: $1,299.99
Mini Tube Vapor Rig Water Pipe by Cap 'N Crunk Mini Tube by Cap 'N Crunk

This Cap 'N Crunk mini tube is made in Milwaukee, Wisconsin and features millie chips incorporated in the neck and base of the water pipe. Smoke diffusion is achieved via a worked three hole fixed downstem.

FEATURES

  • Millie chips
  • Worked 3 hole fixed downstem
  • Made in Milwaukee

SPECIFICATIONS

  • Height: 7 inches
  • Width: 3.25 inches
  • Weight: 244.4 grams
  • Joint Size: 14mm



Our Price: $1,299.99
UV Reactive Bee Head Tube by Sea Shakes UV Reactive Bee Head Tube by Sea Shakes

This Sea Shakes bee head water pipe was made in Florida and features a sculpted bee head with Grateful Dead millie pupils, UV reactive sections, and wig wag sections on the base, water chamber and neck. Sculpted leaves adorn the neck of the pipe while smoke diffusion is achieved via a removable three hole downstem. The bottom of the piece is ti signed, dated and numbered (#10) by the artist.

FEATURES

  • Sculpted bee head
  • Grateful Dead millie pupils
  • UV reactive sections
  • Wig wag sections
  • Sculpted leaves
  • 3 hole removable downstem
  • Ti signed, dated and numbered (#10)

SPECIFICATIONS

  • Height: 12.25 inches
  • Width: 3.25 inches
  • Weight: 650 grams
  • Joint size: 18mm female to 14mm female


Our Price: $1,299.99
Bee Tube by Sea Shakes Bee Tube by Sea Shakes

This Sea Shakes bee tube was made in Florida and features a sculpted bee face, sculpted leaves and wig wags. Smoke diffusion is achieved via a three hole removable downstem. A 14mm slide comes with the water pipe and the piece can easily convert to a rig by replacing the slide with a banger (not included).

FEATURES

  • Sculpted bee's head
  • Sculpted leaves
  • Wig wags
  • 3 hole removable downstem
  • Comes with a 14mm slide
  • Made in Florida

SPECIFICATIONS

  • Height: 11.25 inches
  • Width: 2.8 inches
  • Weight: 604.4 grams
  • Joint Size: 18mm to 14mm female


Our Price: $1,299.99
Bee Tube by Sea Shakes Bee Tube by Sea Shakes

This Sea Shakes bee tube was made in Florida and features a sculpted bee head and Grateful Dead millie eyes. Smoke diffusion is achieved via a four hole fixed diffy, and a 14mm slide is included. The pipe easily converts to a rig by replacing the slide with a banger (not included).

FEATURES

  • Sculpted bee's head
  • Grateful Dead millie eyes
  • 4 hole fixed diffy
  • 14mm slide included
  • Made in Florida

SPECIFICATIONS

  • Height: 11.25 inches
  • Width: 3.25 inches
  • Weight: 570.5 grams
  • Joint Size: 14mm female


Our Price: $1,299.99
Mini Tube Vapor Rig Water Pipe Collab by Hoobs and Jop Mini Tube Collab by Hoobs and Jop

This hand blown mini tube collab by Hoobs and Jop was made in California and features a Hoobs sculpted skull attached to the water pipe. Smoke diffusion is achieved via a three hole fixed downstem and a clear window in the middle of the water chamber allows you to watch the pipe fill up with smoke.

FEATURES

  • Sculpted skull
  • 3 hole fixed downstem
  • Hand blown
  • Made in California

SPECIFICATIONS

  • Height: 6.75 inches
  • Width (Base): 2.75 inches
  • Weight: 220.6 grams
  • Joint Size: 10mm


Our Price: $1,349.99
Steam Punk Concentrate Rig by Liberty Glass Steam Punk Rig by Liberty Glass

This hand blown Liberty vapor rig is made in the USA. Featuring Liberty's steam punk inspired sandblasting work, the pipe also has a natural perc for diffusion and a grade 2 titanium swing.

FEATURES

  • Liberty's steam punk sandblasting work
  • Natural perc
  • Grade 2 titanium swing
  • Hand blown
  • Made in the USA

SPECIFICATIONS

  • Height: 8.5 inches
  • Width: 4 inches
  • Weight: 410 grams


Our Price: $1,499.99
Fumed Vapor Rig Water Pipe by down Neck Fumed Vapor Rig by Down Neck

This Down Neck vapor rig is made in Newark, New Jersey and features Down Neck's signature fuming throughout the water pipe and a fully worked cyclops 14mm dome with tentacles. Smoke diffusion is achieved via a three hole fixed downstem and the bottom of the pipe has an etched signature and date by the artist.

FEATURES

  • Fumed
  • Cyclops dome with tentacles
  • 3 hole fixed downstem
  • Etched signature and date
  • Made in Newark, New Jersey

SPECIFICATIONS

  • Height: 7.25 inches
  • Width: 3.25 inches
  • Weight: 518.6 grams
  • Joint Size: 14mm





Our Price: $1,499.99
Study of Shapes Cylinder Vapor Rig Water Pipe by Andy Roth Cylinder Rig by Andy Roth

This hand blown Andy Roth Study of Shapes cylinder rig was made in Berkeley, California and features purple lollipop & pink lollipop incalmo sections and an encased rhombus opal on the pipe's water chamber and dome. Smoke diffusion is achieved via a two hole fixed diffy and the rig's foot is ti signed and dated by the artist.

FEATURES

  • Purple lollipop & pink lollipop incalmo sections
  • Encased rhombus opals
  • 2 hole fixed diffy
  • Ti signed and dated
  • Hand blown
  • Made in Berkeley, CA

SPECIFICATIONS

  • Height: 9 inches
  • Width: 2.6 inches
  • Weight: 275.3 grams
  • Joint Size: 14mm


Our Price: $1,499.99
Study of Shapes Cylinder Vapor Rig Water Pipe by Andy Roth Cylinder Rig by Andy Roth

This hand blown Andy Roth Study of Shapes cylinder rig was made in Berkeley, California and features incalmo sections of Blue Stardust and Green Stardust. A rhombus opal encased inside a rhombus attachment adorns the front of the pipe's water chamber and dome, while smoke diffusion is achieved via a two hole fixed diffy. Ti signed and dated by the artist.

FEATURES

  • Incalmo sections
  • Blue Stardust and Green Stardust
  • Rhombus opals encased inside rhombus attachments
  • 2 hole fixed diffy
  • Ti signed and dated
  • Hand blown
  • Made in Berkeley, CA

SPECIFICATIONS

  • Height: 9.8 inches
  • Width: 2.4 inches
  • Weight: 284.5 grams
  • Joint Size: 14mm male


Our Price: $1,499.99
Glassblowing Bee Vapor Rig Water Pipe Set by Sea Shakes Glassblowing Bee Rig Set by Sea Shakes

This Sea Shakes glassblowing bee rig set was made in Florida and features a sculpted bee man rig, sculpted torch and electroformed sections on the bee and stands.

FEATURES

  • Sculpted bee man rig
  • Sculpted torch
  • Electroformed sections on the bee and stands
  • Made in Florida

SPECIFICATIONS

Pipe
  • Height: 14.25 inches
  • Width: 8 inches
  • Weight: 2041 grams
  • Joint Size: 14mm male


Our Price: $1,499.99
Lady Bee Vapor Rig Water Pipe by Sea Shakes Lady Bee Rig by Sea Shakes

This Sea Shakes lady bee rig was made in Florida and features a sculpted bee face and electroformed sections. A 14mm male adapter and dome are included with the pipe and the bee's left leg is ti signed by the artist.

FEATURES

  • Sculpted bee face
  • Electroformed sections
  • Adapter and dome included
  • Made in Florida

SPECIFICATIONS

  • Height: 14.25 inches
  • Width: 6.25 inches
  • Weight: 1360.7 grams
  • Joint Size: 14mm female


Our Price: $1,499.99
Vapor Rig by Little B Vapor Tube by Little B

This Little B vapor rig is made in California, USA. Featuring Little B's sandblasted designs, this tube has a 2 hole downstem for smoke/vapor diffusion and is ti signed by the artist.

FEATURES

  • Sandblasted patterns
  • 2 hole downstem
  • Ti signed by the artist
  • Made in California, USA

SPECIFICATIONS

  • Height: 9.1 inches
  • Width: 3.5 inches
  • Weight: 354.2 grams
  • Joint Size: 14mm to 14mm


Our Price: $1,599.99
Cyclops Cloud Vapor Rig Water Pipe by Down Neck Cyclops Cloud Rig by Down Neck

This Down Neck cloud rig is made in Newark, New Jersey and features Down Neck's signature fume work. An etched signature and date by the artist is located on one of the water pipes legs. Comes with a worked 14mm dome.

FEATURES

  • Fumed
  • Etched signature and date
  • Made in Newark, New Jersey

SPECIFICATIONS

  • Height: 7.5 inches
  • Width: 6.4 inches
  • Weight: 693.2 grams
  • Joint Size: 14mm


Our Price: $1,599.99
Vapor Rig Water Pipe by Casto Vapor Rig by Casto

This hand blown Casto vapor rig was made in Albuquerque, New Mexico and features a four hole fixed diffuser for smoke diffusion and is ti signed and dated by the artist on the 14mm joint.

FEATURES

  • Hand blown
  • 4 hole fixed diffuser
  • Ti signed and dated
  • Made in Albuquerque, NM

SPECIFICATIONS

  • Height: 4.75 inches
  • Width: 3.5 inches
  • Weight: 282.5 grams
  • Joint Size: 14mm


Our Price: $1,599.99
FSU Mini Tube Vapor Rig Water Pipe Collab by Glass Hopper and Kennaroo FSU Mini Tube Collab by Glass Hopper & Kennaroo

This hand blown Glass Hopper and Kennaroo FSU mini tube collab was made in the USA and features garnet and gold wig wags, an Osceola cab with sculpted bees and honey drips, a large Osceola millie on the bottom of the water pipe, honey drips and an encased Osceola millie with a sculpted bee for the dome handle. Smoke diffusion is achieved via a removable two hole downstem and the bottom of the rig is ti signed and dated by the artists.

FEATURES

  • Garnet and gold wig wags
  • Osceola cab
  • Sculpted honey bees
  • Honey drips
  • Osceola millies
  • 2 hole removable downstem
  • Ti signed and dated
  • Hand blown
  • Made in the USA

SPECIFICATIONS

  • Height: 7.8 inches
  • Width: 3 inches
  • Weight: 329.6 grams
  • Joint Size: 14mm to 14mm


Our Price: $1,649.99
Marble Vapor Rig Collab by Vigil and N3rd Marble Rig Collab by Vigil and N3rd

This hand blown marble rig collab by Vigil and N3rd features 2 N3rd marbles, one on the base of the pipe and one on the dome. The marble at the base features a honeycomb implosion, while the dome marble features an implosion. The downstem is removable and has 4 slits to diffuse the smoke/vapor. Ti signed and dated by the artists.

FEATURES

  • 2 N3rd marbles
  • Removable 4 slit downstem
  • Ti signed and dated by the artists
  • Pipe made by Vigil


SPECIFICATIONS

  • Height: 8 inches
  • Width: 4 inches
  • Weight: 390.5 grams
  • Joint Size: 14mm to 14mm




Our Price: $1,749.99
Toucan Vapor Rig Water Pipe by Burtoni Toucan Rig by Burtoni

Burtoni toucan rig

Our Price: $1,849.99
Confetti Sherlock Hand Pipe Collab by JAG and Mike Gong Confetti Sherlock Collab by JAG and Mike Gong

This hand blown JAG and Mike Gong sherlock hand pipe collab was made in the USA and features an encased millie on the side of the bowl and comes with a custom stand. The back of the pipe is ti signed and dated by the artists.

FEATURES

  • Encased millie
  • Custom stand included
  • Ti signed and dated
  • Hand blown
  • Made in the USA

SPECIFICATIONS

  • Length: 6.25 inches
  • Width: 2 inches
  • Weight: 47.2 grams


Our Price: $1,899.99
'Lil Tango Beanie Baby Rig by Glass Hopper 'Lil Tango Beanie Baby Rig by Glass Hopper

This hand blown Glass Hopper Beanie Baby rig was made in New Jersey and comes with a ty heart millie. Smoke diffusion is achieved via a two hole fixed diffy, and the bottom of the water pipe is ti signed and dated by the artist.

FEATURES

  • 2 hole fixed diffy
  • ty heart millie
  • Ti signed and dated
  • Hand blown

SPECIFICATIONS

  • Height: 5.5 inches
  • Width: 5 inches
  • Weight: 497.8 grams
  • Joint Size: 14mm female


Our Price: $1,899.99
Vapor Rig Water Pipe Collab and Pendant Set by Kinda and Pyrology Rig Collab and Pendant Set by Kinda and Pyrology

This rig collab and pendant set by Kinda and Pyrology is made in the USA and features Max Kind's sacred geometry tubing and a Pyrology multi slit dome perc for smoke diffusion.

FEATURES

  • Kinda's sacred geometry tube patterns
  • Pyrology's dome perc
  • Made in the USA

SPECIFICATIONS

Pipe
  • Height: 7.25 inches
  • Width: 3.25 inches
  • Weight: 335.5 grams
  • Joint Size: 14mm

Pendant
  • Length: 1.75 inches
  • Width: 1.6 inches
  • Weight: 26.9 grams


Our Price: $1,999.99
Scenic Window Vapor Rig Water Pipe by Bowman Glass Scenic Window Rig by Bowman Glass

This hand blown Bowman Glass rig was made in Portland, Oregon and features two large window sections that show off the three hole sculpted diffy.

FEATURES

  • 2 window sections
  • 3 hole sculpted diffy
  • Hand blown
  • Made in Portland, Oregon

SPECIFICATIONS

  • Height: 7.4 inches
  • Width: 3.25 inches
  • Weight: 368.3 grams
  • Joint Size: 14mm female


Our Price: $1,999.99
Sculpted Bunny Vapor Rig Water Pipe and Dabber Set by Casto Sculpted Bunny Rig and Dabber Set by Casto

This hand made, sculpted bunny rig by Casto is made in Albuquerque, New Mexico and comes with a sculpted flower dabber. Smoke diffusion is achieved via a four hole fixed downstem and the rabbit's head functions as a natural splash guard.

FEATURES

  • Comes with a sculpted flower dabber
  • 4 hole fixed downstem
  • Hand made
  • Made in Albuquerque, New Mexico

SPECIFICATIONS

Pipe
  • Height: 5.75 inches
  • Width: 5.5 inches
  • Weight: 454.2 grams
  • Joint Size: 14mm
Dabber
  • Length: 6.5 inches
  • Width: 4.25 inches
  • Weight: 132.6 grams



Our Price: $2,099.99
TraVela Galaxy Vapor Rig Water Pipe Collab by Vela G and Gateson Recko TraVela Galaxy Rig Collab by Vela G & Gateson Recko

This hand blown Vela G and Gateson Recko TraVela rig collab was made in the USA and features a Gateson galaxy cab attached to the pipe. Smoke diffusion is achieved via a two hole fixed diffy and the back of the water pipe is ti signed and dated by both artists.

FEATURES

  • Gateson galaxy cab attachment
  • 2 hole fixed diffy
  • Ti signed and dated
  • Hand blown
  • Made in the USA

SPECIFICATIONS

  • Height: 8.5 inches
  • Width: 1.8 inches
  • Weight: 205.5 grams
  • Joint Size: 14mm


Our Price: $2,199.99
Slyme Pocket Rocket Vapor Rig Water Pipe Set by Lord Slyme Pocket Rocket Set by Lord

This hand blown Lord pocket rocket set was made in the USA and features a sculpted bunny face attachment and slyme coloring. Smoke diffusion is achieved via a single hole plus single slit fixed diffy, and a 10mm slide comes with the pipe. A sculpted traffic cone dabber/cap is included and the water pipe easily converts to a rig by replacing the slide with a banger (not included).

FEATURES

  • Slyme coloring
  • Sculpted bunny face attachment
  • Single hole plus single slit fixed diffy
  • Includes a traffic cone dabber/cap
  • Includes a 10mm slide
  • Hand blown
  • Made in the USA

SPECIFICATIONS

  • Height: 3.25 inches
  • Width: 2 inches
  • Weight: 172.5 grams
  • Joint Size: 10mm female


Our Price: $2,199.99
Water Pipe Collab by Chad G, Freeek and Bank Glass Water Pipe Collab by Chad G and Freek

This Chad G and Freek water pipe collab was made in the USA and features two sculpted trees along with eleven horns and a sculpted flower with a fumed implosion pistil attached to the water chamber. A fumed implosion adorns the top of the water chamber and smoke diffusion is achieved via a four hole inline perc.

FEATURES

  • 2 sculpted trees
  • 11 horns
  • Sculpted flower with fume implosion pistil
  • Fume implosion
  • 4 hole inline perc
  • Made in the USA

SPECIFICATIONS

  • Height: 7 inches
  • Width: 5 inches
  • Weight: 418 grams
  • Joint Size: 14mm


Our Price: $2,339.99
Study of Shapes Layback Vapor Rig Water Pipe by Andy Roth Study of Shapes Layback Rig by Andy Roth

This Andy Roth Study of Shapes layback rig is made in California and features six opals encased in hexagons. Smoke diffusion is achieved via a two hole fixed downstem and the water pipe is ti signed and dated by the artist on the back of the water chamber.

FEATURES

  • 6 opals encased in hexagons
  • 2 hole fixed downstem
  • Ti signed and dated
  • Made in California

SPECIFICATIONS

  • Length: 7 inches
  • Width: 4.4 inches
  • Weight: 230.2 grams
  • Joint Size: 10mm


Our Price: $2,399.99
Large Vapor Rig by Huxtable Glass Large Vapor Rig by Huxtable Glass

This large Huxtable Glass vapor rig was made during a live glass blowing demonstration in the TLeaf studio. Standing at 18.5 inches, it features a single hole fixed downstem to diffuse the vapor and comes with an 18mm dome.

FEATURES

  • Made here in the Tobacco Leaf studio
  • Single hole fixed downstem
  • comes with an 18mm dome

SPECIFICATIONS

  • Height: 18.5 inches
  • Width: 4.3 inches
  • Weight: 696.7 grams
  • Joint Size: 18mm


Our Price: $2,449.99
Snakeskin Manimal Vapor Rig Water Pipe by Robert Mickelsen (RAM) Snakeskin Manimal Rig by Robert Mickelsen (RAM)

This Robert Mickelsen Snakeskin Manimal Rig is made in the USA and comes with two removable horn dabbers. Smoke diffusion is achieved via a three hole fixed downstem and the water pipe has an etched RAM signature and date.

FEATURES

  • Snakeskin pattern
  • 2 removable horn dabbers
  • 3 hole fixed downstem
  • Etched signature and date
  • Made in the USA

SPECIFICATIONS

  • Height: 10 inches
  • Width (base): 2.75 inches
  • Weight: 302.5 grams
  • Joint Size: 10mm


Our Price: $2,499.99
Piston Perc Vapor Rig Water Pipe Collab by Hoobs and Jop Piston Perc Rig Collab by Hoobs and Jop

This rig collab by Hoobs and Jop was made in the USA and features a piston perc on both sides of the water pipe for smoke diffusion. The eight legged mouse with millie eyes acts as a natural splash guard to help prevent water from splashing up too high.

FEATURES

  • Piston percs
  • 8 legged mouse with millie eyes
  • Made in the USA

SPECIFICATIONS

  • Height: 8.25 inches
  • Width: 3.4 inches
  • Weight: 365.7 grams
  • Joint Size: 14mm


Our Price: $2,599.99
Fish Scale Manimal Vapor Rig Water Pipe by Robert Mickelsen (RAM) Fish Scale Manimal Rig by Robert Mickelsen (RAM)

This hand made Robert Mickelsen fish scale manimal rig is made in Florida and features two removable horn dabbers, a three hole fixed downstem for smoke diffusion that ends in a 10mm joint to slide the vapor dome on, and the side of the water pipe is etched with RAM's signature and the date the pipe was made.

FEATURES

  • Fish scale pattern
  • 3 hole fixed downstem
  • 2 removable horn dabbers
  • Etched signature and date
  • Hand made
  • Made in Florida

SPECIFICATIONS

  • Height: 10.5 inches
  • Width (base): 2.6 inches
  • Weight: 296.2 grams
  • Joint Size: 10mm


Our Price: $2,699.99
Carved Zipper Vapor Rig by Natey Carved Zipper Rig #1 by Natey

This hand blown Natey rig is the very first carved zipper Natey Biskind has made and is #1 of a forth coming series, a must have for the serious Natey collectors. Featuring Natey's famous zipper design on the mouthpiece tube and the downstem, diffusion is achieved by a 2 hole fixed downstem that ends in a 14mm worked joint to slide the dome on. The dome is fully worked with an encased opal and there is another encased opal between 2 horns and one at the base of the pipe.

FEATURES

  • Natey's famous zipper design
  • Worked downstem and joint
  • Worked dome with encased opal
  • Horn seperated by an encased opal
  • 2 hole fixed downstem
  • Made in the USA
  • Natey's very first carved zipper
  • #1 of a forth coming series



SPECIFICATIONS

  • Height: 7 inches
  • Width: 2.2 inches
  • Weight: 262 grams
  • Joint Size: 14mm


Our Price: $2,879.99
OxygenFrog Oxygen Frog controller with HPC Compressor V2

TLEAF Studios has ran on the Oxygen Frog for over 3 years now. The system has exceeded our expectations and now we are proud to represent the oxygen frog as an official distributor. Here at TLEAF we can supply you with all of the oxygen frog systems and components. Having used the system for a long time we are very familiar with it and would be more than happy to help answer any questions.

The OxygenFrog is here to provide you with the oxygen system of your dreams. Until now, oxygen concentrator systems were finicky and underpowered. Oxygen purity problems persisted. Previous attempts to overcome these shortcomings were prohibitively expensive. On-demand oxygen systems with high volume, high purity capability are now within the reach of studios with only a modest budget. The game has been officially changed.

OxygenFrog offers everything from individual components, to complete packages.

The OxygenFrog will automatically control your oxygen concentrators and compressors to provide you with unlimited, on-demand oxygen. It is suitable for small single torch studios and full production shops. It is infinitely expandable.
As your studio grows, so can the OxygenFrog.

The OxygenFrog is the vital piece of the puzzle that transforms oxygen concentrator systems from being a marginal compromise to becoming the glassblowers dream.


With the OxygenFrog in control, you will never have to think about oxygen again.




OxygenFrog Controller

- Two 115v, 15 amp circuits
- Enough power to run 50 LPM of oxygen concentrators
- 50 LPM is enough oxygen to provide the equivalent of a K tank's worth of oxygen in less than 2.5 hours.

OxygenFrog HPC compressor

-Pressures of up to 125psi

-Restart at any pressure

-Active Compression Control ACC

-Allows oxygen purity that is higher than anything else on the market.

Choosing the proper size OxygenFrog system

Select a size of OxygenFrog system based on your expected oxygen consumption.

K Tank Equivalents: (250 cuft)

A 30 liter per minute OxygenFrog system will produce the equivalent of one K tank every 3.9 hours of operation.

A 50 liter per minute OxygenFrog system will produce the equivalent of one K tank every 2.3 hours of operation.

Liquid Oxygen Equivalents:

A 50 liter per minute OxygenFrog system will produce the equivalent of one 240 liter liquid tank every 69 hours of operation.


With the OxygenFrog in control, you will never have to think about oxygen again.

Our Price: $2,974.89
"The Angler" Water Pipe Collab by Germ and Wyoming "The Angler" Water Pipe Collab by Germ and Wyoming

Introducing Chad "The Angler" McClellan by Germ and Wyoming, number 2 in the Beasts of Big Business collab series. Featuring a sculpted angler fish head, sandblasted suit, and three hole slide, the left leg of the water pipe is ti signed by the artists.

FEATURES

  • #2 of the Beasts of Big Business collab series
  • Sculpted angler fish head
  • Sandblasted suit
  • 3 hole slide
  • Ti signed
  • Made in the USA

SPECIFICATIONS

  • Height: 10.5 inches
  • Width: 6.25 inches
  • Weight: 567.9 grams
  • Joint Size: 14mm


Our Price: $3,199.99
Neo-Tribal Mini Tube Vapor Rig Water Pipe Collab by Andy Roth and Etai Rahmil Mini Tube Rig Collab by Andy Roth & Etai Rahmil

This Andy Roth and Etai Rahmil mini tube collab was made in the USA and features a sculpted neo-tribal mask attachment with encased rhombus shaped opals, and incalmo sections of butterscotch and chocolate brown. Smoke diffusion is achieved via a removable two hole downstem and the bottom of the pipe is ti signed and dated by the artists.

FEATURES

  • Sculpted neo-tribal mask attachment
  • Rhombus shaped opals
  • Incalmo sections
  • 2 hole removable downstem
  • Ti signed and dated
  • Made in the USA

SPECIFICATIONS

  • Height: 8.5 inches
  • Width: 3.9 inches
  • Weight: 385.2 grams
  • Joint Size: 14mm to 14mm


Our Price: $3,199.99
Autumn Beanie Baby Vapor Rig Water Pipe by Glass Hopper Autumn Beanie Baby by Glass Hopper

This hand blown Glass Hopper Beanie Baby water pipe was made in New Jersey and features autumn leaf millies worked into the pipe and comes with a ty heart millie.
FEATURES

  • Autumn leaf millies
  • Ty heart millie
  • Hand blown
  • Made in New Jersey

SPECIFICATIONS

  • Height: 7.5 inches
  • Width: 5.75 inches
  • Weight: 1002.5 grams
  • Joint Size: 14mm female


Our Price: $3,199.99
Mini Tube Vapor Rig Water Pipe by Vela G Mini Tube by Vela G

This hand blown Vela G mini tube was made in California and features Vela's lippies throughout the rig, a lippie attachment and Thomas Transparent Green coloring. Smoke diffusion is achieved via a two hole fixed diffy and the bottom of the pipe is ti signed and dated by the artist.

FEATURES

  • Thomas Transparent Green
  • Lippies
  • Lippie attachment
  • 2 hole fixed diffy
  • Hand blown
  • Made in California

SPECIFICATIONS

  • Height: 5 inches
  • Width: 2.5 inches
  • Weight: 99 grams
  • Joint Size: 10mm female


Our Price: $3,199.99
Vapor Rig Water Pipe Collab by Bishop and Kinda Rig Collab by Bishop and Kinda

- 14mm male joint
- 14mm female slide included

Our Price: $3,499.99
Screaming Gorilla Collab by Coyle and Cha Glass Screaming Gorilla Collab by Coyle and Cha

  • 2 hole fixed diffy
  • Ti signed and dated by the artists
  • 10mm female joint

Our Price: $3,699.99
Torch Rig Collab by Hitman and Steve Hitt Torch Rig Collab by Hitman and Steve Hitt

This Hitman and Steve Hitt butane torch rig is made in the USA. The vapor rig fills with butane to allow you to create a flame to heat up your nail. Please be very cautious when operating! Featuring a double barrel diffuser, this piece is decorated with a Hitman millie and a Steve Hitt honey comb surrounded by bees.

FEATURES

  • Fills with butane to create a torch
  • Double barrel diffuser
  • Hitman millie
  • Steve Hitt honey comb
  • Use caution when operating!
  • Made in the USA

SPECIFICATIONS

  • Height: 6.3 inches
  • Width: 2.6 inches
  • Weight: 349.5 grams
  • Joint Size: 10mm


Our Price: $3,749.99
UV Reactive A-Frame Vapor Rig Mini Tube Water Pipe by Kiva Ford UV Reactive A-Frame Tube by Kiva Ford

- A Frame Perc
- UV Reactive Sections
- 14mm female joint

Our Price: $3,799.99
Sienna Brown Burdling by Calm glass Sienna Brown Burdling by Calm

10mm Sienna Brown Burdling by Calm Glass

Our Price: $3,899.95
Burdling by Calm glass GA HalfBlood Burdling Rig by Calm

10mm  Burdling by Calm Glass

Our Price: $3,999.99
Vapor Rig Water Pipe Collab by Bishop, Vela G & Q Heffner Rig Collab by Bishop & Vela G with Q Heffner QFZ

- 14mm female joint
- Includes a Quave quartz banger
- Includes a custom made QFZ quartz banger cap

Our Price: $4,199.99
Slyme Cup Rig by Matt Eskuche Slyme Cup Rig & Pendant Set by Matt Eskuche

This hand blown, Matt Eskuche slyme cup vapor rig is made in the USA. The rig comes with a glass rod that Matt made using the leftover glass scraps that came from this pipe and an incalmo can pendant.

FEATURES

  • Slyme coloring
  • Hand blown
  • Made in the USA
  • Comes with colored glass rod
  • Comes with a crushed can pendant

SPECIFICATIONS

  • Height: 10 inches
  • Width: 2.3 inches
  • Weight: 341.6 grams
  • Joint Size: 14mm


Our Price: $4,499.99
Rocker Vapor Rig Water Pipe by Robert Mickelsen Devil Rocker Rig by Robert Mickelsen (RAM)

This Robert Mickelsen rocker rig is made in the USA and features a sculpted head with white horns, hands, a marble on the back of the pipe, a wig wag section on the water chamber, and can rock back and forth. Smoke diffusion is achieved via a three hole fixed downstem and the artist etched his signature and the year into the back of the water pipe.

FEATURES

  • Sculpted head with white horns
  • Marble on the back of the pipe
  • Wig wag
  • Rocker horns hands
  • 3 hole fixed downstem
  • Etched signature and date
  • Made in the USA

SPECIFICATIONS

  • Height: 10 inches
  • Length: 13 inches
  • Width: 5.75 inches
  • Weight: 785.4 grams
  • Joint Size: 14mm


Our Price: $4,499.99
Double Headed Bear Collab by Coyle & Cha Double Headed Bear Collab by Coyle & Cha

  • 3 hole fixed diffy
  • Ti signed & dated by the artists
  • 10mm female joint

Our Price: $4,499.99
Bee Vapor Rig Water Pipe and Flower Stand Set by Down Neck Bee Rig and Flower Stand Set by Down Neck

This incredible hand blown Down Neck rig is made in Newark, New Jersey and features a sculpted bee as the water pipe along with a flower stand and worked dome with dome stand. The flower stand is ti signed and dated by the artist.

FEATURES

  • Comes with sculpted flower stand and a dome stand
  • Ti signed and dated by the artist
  • Made in Newark, New Jersey

SPECIFICATIONS

Pipe
  • Length: 13.5 inches
  • Width: 6.5 inches
  • Weight: 1097.3 grams
  • Joint Size: 14mm

Stand
  • Height: 11.5 inches
  • Width: 13.25 inches
  • Weight: 1200.8 grams


Our Price: $5,499.99
Solo Working Set #1 by Calm Solo Workling Set #1 by Calm

Solo Working Set #1 by Calm. There has only been two of these solo worked burdlings made so far. Calm calls them Worklings. This set includes a 10mm Burding with an XL quave club banger, a matching burd pendant and a carb cap featuring a burd millie inside.

Our Price: $5,999.98
Color Fade Rip Curl Tube by Salt

This hand blown Salt Rip Curl tube was made in the TLeaf studio during his last class/demo we hosted and features a nine way color fade and a sculpted eye on the pipe and slide. Smoke diffusion is achieved via a Rip Curl perc, and the base of the water pipe is ti signed and dated by the artist.

FEATURES

  • 9 way color fade
  • Rip Curl perc
  • Sculpted eyes
  • Ti signed and dated
  • Hand blown
  • Made in the TLeaf studio

SPECIFICATIONS

  • Height: 8.25 inches
  • Width: 3.5 inches
  • Weight: 483.2 grams
  • Joint Size: 14mm female



Our Price: $5,999.99
"Raven Medicine" Vapor Rig Water Pipe by Bishop "Raven Medicine" by Bishop

- Removable raven dabber
- Removable raven eggs
- Comes with two 14mm slides
- Converts to a rig by replacing the slide with a banger (not included)

Our Price: $5,999.99
Purple Potion 2.0 Bear Rig by Coyle Purple Potion 2.0 Bear Rig by Coyle

  • Featuring GA's new experimental color changing Purple Potion 2.0
  • 2 hole fixed diffy
  • Ti signed and dated
  • 14mm female joint

Our Price: $5,999.99
Rhino Rig Collab by Coyle & Cha Glass Rhino Rig Collab by Coyle & Cha Glass

  • Ti signed and dated by the artists
  • 14mm female joint

Our Price: $5,999.99
Serum Rip Curl Tube Collab by Salt & 2 Stroke

This hand blown Salt and 2 Stroke Rip Curl mini tube collab was made in the TLeaf studio during their last class/demo we hosted and features color changing Serum sections and 2 Stroke's color fade helio coil. Two sculpted eyes adorn the pipe while another sculpted eye is worked into the three hole slide. The base of the water pipe is ti signed and dated by the artists.

FEATURES

  • Color changing Serum sections
  • Color fade helio coil
  • 3 sculpted eyes
  • 3 hole slide
  • Ti signed and dated
  • Hand blown
  • Made in the TLeaf studio

SPECIFICATIONS

  • Height: 6.8 inches
  • Width: 2.75 inches
  • Weight: 329.9 grams
  • Joint Size: 14mm female


Our Price: $7,999.99
Giraffe Rocker Vapor Rig Water Pipe Collab by Robert Mickelsen (RAM) and Matt Robertson Giraffe Rocker Collab by Matt Robertson and Robert Mickelsen (RAM)

This hand made, one of a kind Matt Robertson and Robert Mickelsen (RAM) giraffe rocker rig collab was made in the TLeaf studio during a glass blowing class and features Matt's signature sculpted giraffe on RAM's rockers. The vapor dome is a meditating Mandrill that sits atop a removable single hole downstem. Ti signed and dated by RAM on the giraffes front left shoulder.

FEATURES

  • Meditating Mandrill vapor dome
  • Removable single hole downstem
  • Hand made in the TLeaf studio
  • Ti signed and dated by Robert Mickelsen

SPECIFICATIONS

  • Height: 12.5 inches
  • Width: 4 inches
  • Length: 8.5 inches
  • Weight: 952.6 grams
  • Joint Size: 14mm



Our Price: $8,499.99
RARE Non Functional Dino Collab by Elbo & Joe Peters RARE Non Functional Dino Collab by Elbo & Joe Peters

This extremely rare hand blown Elbo & Joe Peters non functional dino collab comes from our private collection and is available for a limited time only. This piece features a honeycomb base and honeycomb spikes, and the bottom of the base is ti signed and dated by the artists.

FEATURES

  • Honeycomb base
  • Honeycomb spikes
  • First ever (possibly only?) non functional dino collab
  • Ti signed and dated
  • Available for a limited time only
  • Hand blown
  • Made in the USA

SPECIFICATIONS

  • Height: 5 inches
  • Length: 10 inches
  • Width: 4.6 inches
  • Weight: 590 grams



Our Price: $8,999.99
Vapor Rig Water Pipe by Elbo Imagination Station Rig by Elbo

This hand blown Elbo rig was made in the USA and is the first in a new series by Elbo. Smoke diffusion is achieved via a two hole fixed diffuser and the bottom of the water pipe is ti signed, dated and numbered by the artist. A 14mm quartz Quave Club Banger is included.

FEATURES

  • #1 of a new series by Elbo
  • 2 hole fixed diffuser
  • Ti signed, dated and numbered
  • Quartz Quave Club Banger
  • Hand blown
  • Made in the USA

SPECIFICATIONS

  • Height: 7.25 inches
  • Width: 4 inches
  • Weight: 350.3 grams
  • Joint Size: 14mm female


Our Price: $10,999.99
Fuck With The Vision, by Elbo Glass

Put your yeezys on. I fuck with the vision fam, lets link and build. 10mm female joint, comes with an XL quave club banger and pelican case. Made in house at TLeaf studios during elbo's recent private class, last feb 2017.

Our Price: $15,499.99
Rain Drop Celestine Devi Vapor Rig Water Pipe by Banjo Rain Drop Celestine Devi Rig by Banjo

This hand blown Banjo Devi rig was made in the USA and features Glass Alchemy's Rain Drop color. Celestine is the first in the Devi series and is representative of the 5th chakra, Vishuddha. Smoke diffusion is achieved via a two hole fixed diffy and the base of the water pipe is ti signed by the artist. A 14mm Quave quartz banger and Pelican 1400 case are included.

FEATURES

  • Glass Alchemy's Rain Drop color
  • First of the Devi series
  • 2 hole fixed diffy
  • Ti signed
  • Quave quartz banger included
  • Pelican 1400 case included
  • Hand blown
  • Made in the USA

SPECIFICATIONS

  • Height: 8.25 inches
  • Width: 3.4 inches
  • Weight: 454.9 grams
  • Joint Size: 14mm female


Our Price: $39,898.99